User Tools

Site Tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Last revisionBoth sides next revision
istatrol [2016/03/26 15:17] – [Temperature Sensors] Clarification. Traumflugistatrol [2016/03/26 15:21] – [Bugs] Traumflug
Line 171: Line 171:
   * Replacing the ATtiny2313 with an ATtiny4313. Program memory is so constrained that this is considered to be a bug.   * Replacing the ATtiny2313 with an ATtiny4313. Program memory is so constrained that this is considered to be a bug.
   * C3, 1.0 uF, should have a 200\_mil wide footprint. Many suppliers don't have 100\_mil types at this capacity.   * C3, 1.0 uF, should have a 200\_mil wide footprint. Many suppliers don't have 100\_mil types at this capacity.
-  * Key //Menu// should go to INT1 to allow triggering an interrupt. Crucial for allowing the MCU to sleep.+  * Key //Menu// should go to INT1 to allow triggering an interrupt. Crucial for allowing the MCU to go to sleep.
   * These three thermistor connectors actually don't work this way. Connecting to means that current flows partially not to the measuring capacitor, but to the other ATtiny pin. Can likely solved with diodes, but note that a capacitor fills reasonably linear in the lower 20%, only.   * These three thermistor connectors actually don't work this way. Connecting to means that current flows partially not to the measuring capacitor, but to the other ATtiny pin. Can likely solved with diodes, but note that a capacitor fills reasonably linear in the lower 20%, only.
  
istatrol.txt · Last modified: 2018/05/27 16:10 (external edit)