User Tools

Site Tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
connect_sevenswitch_to_ramps [2016/05/29 15:46] – [Firmware Modification] Also note the timer used to do PWM on a pin. Traumflugconnect_sevenswitch_to_ramps [2016/05/29 15:55] – [Firmware Modification] Note D11 being unavailable for PWM on some/most firmwares. Traumflug
Line 39: Line 39:
 There are several pin naming schemes in use. This table shows different names for the same pin. Teacup Firmware allows two names, each of them works equally well: There are several pin naming schemes in use. This table shows different names for the same pin. Teacup Firmware allows two names, each of them works equally well:
  
-^RAMPS ^ [[https://www.arduino.cc/en/Hacking/PinMapping2560|Arduino]] ^ ATmega ^ Timer((This is the internal name of the timer used to do PWM on this pin. Use this name when investigating wether a particular firmware uses this timer for other purposes, making PWM on this pin unavailable.)) ^ Teacup ^ Marlin ^ +^RAMPS ^ [[https://www.arduino.cc/en/Hacking/PinMapping2560|Arduino]] ^ ATmega ^ Timer((This is the internal name of the timer used to do PWM on this pin. Use this name when investigating wether a particular firmware uses this timer for other purposes, making PWM on this pin unavailable.)) ^ Teacup ^ Marlin ^ Remarks 
-^    D4|   D4|  PG5|  OC0B|   DIO4 or PG5|   4| +^    D4|   D4|  PG5|  OC0B|   DIO4\_or\_PG5|   4
-^    D5|   D5|  PE3|  OC3A|   DIO5 or PE3|   5| +^    D5|   D5|  PE3|  OC3A|   DIO5\_or\_PE3|   5
-^    D6|   D6|  PH3|  OC4A|   DIO6 or PH3|   6| +^    D6|   D6|  PH3|  OC4A|   DIO6\_or\_PH3|   6
-^   D11|  D11|  PB5|  OC1A|  DIO11 or PB5|  11|+^   D11|  D11|  PB5|  OC1A|  DIO11\_or\_PB5|  11|PWM unavailable when using Teacup or Marlin firmware((These firmwares use OC1A as stepper timer.)) |
  
 ==== Teacup ==== ==== Teacup ====
connect_sevenswitch_to_ramps.txt · Last modified: 2023/10/30 23:53 (external edit)